Head Unicore- Intermediate

31.00 (cm)
40.00 (cm)
31.00 (cm)
Current Stock:
Adding to cart… The item has been added

Introducing the new UNICORE range, 

This intermediate head is perfect for allowing you to sculpt a variety of humanoid head types you can imagine, and comes with a unique plug and screw adaptor so you can use either our 22mm ball stud, or Square K&S brass.

The humanoid shape and 3mm dimples allow material to adhere to the surface without slipping off, materials such as such as plasticine, milliput, and many, many more.

Our team have designed this core type to enable magnetic mouth replacements, either by using the 10x6mm rare earth cavity or the angled jaw line.


To ensure your plug adaptor is permanently secure inside your Unicore product, please use two part epoxy glue (Sold separately), and push the plug into place (please make sure the end is caped to ensure no glue rises into the K&S channel.

To Ensure your Ball Stud is secure, screw into position and generously apply two part epoxy glue into the M3 threaded hole and submerge over the hexagonal nut.

Material can be removed via a Dremel or sanding to further customise the core to suit your needs, however caution is advised on how much material should be removed and reinforcing areas to maintain structural strength on removed. 

Due to print production, some resin prints may loose their threads, simply use a M3 tapper to reclaim the lost threading.



1x Unicore head - Intermediate 

1x Unicore Plug Adaptor

1x 22mm Ball Stud with 6mm Ball

1x M3 Cup screw

2x 8m White beads

Colour may vary (standard grey usually supplied)


Please note: Baked clays, such as Cosclay, Fimo, etc, may run the risk of thermal damage to the resin print strength, continue at your own risk.